Amglo Kemlite Laboratories Amglo Kemlite Laboratories

Information on application of PAR56 lamps on locomotives

Application information for PAR56 lamps on locomotives:

There are a few makes of locomotive PAR56 lamp fixtures. There are basically two types of fixtures. One type clamps the lamp into front hinged portion of the fixture, while in the other the lamp is not clamped. Amglo does not supply fixtures, but two types of fixtures are shown below. Care should be taken with each model to ensure the lamp is well secured in the fixture. Maintenance of fixtures is performed to align the lamp beam by following manufacturer's instructions. There is a rubber gasket that secures the lamp from vibration. Make sure the rubber ring is installed and if worn or cut; it should be replaced.

Here is a photo of a fixture that does not clamp the lamp to the hinged portion of the fixture and to the right is the same fixture opened to show the rubber sealing ring (partially removed for illustration):

Here is a photo of a fixture that clamps the lamp to the hinged portion of the fixture and to the right is the same fixture open to show the clamping arrangement:

Need more information? Contact the halogen experts for pricing or technical information.

8787 Enterprise Blvd • Largo • FL 33773 • Ph (727) 812-2000 • Fax (727) 812-2001
C 2006 Amglo Kemlite Laboratories. All rights Reserved
Contact Us l Locations l Site Map l About Us l Search l Home
website design & development: Eurograf Design • hosting: myszka.com